The UniMeasure HX Series consists of a family of environmentally sealed cable extension transducers for the measurement of linear position and/or linear velocity. The HX models are appropriate for hostile environments where exposure to rain, wash down, or submersion in various liquids are concerns. With standard features such as oring seals in all joints, wire rope dust and debris wiper, and rigid two point mounting system, the HX series is the preferred solution when measurement in an adverse environment is necessary. The units are available in two basic package configurations determined by the overall measurement range. Thirty ranges from 0-2 inches to 0-2,000 inches are offered. Electrical outputs include ratiometric voltage divider, bridge circuit, 4-20 mA, 0 to 5 or 0 to 10 VDC, ±10 VDC, and quadrature square wave digital. A brief description of each of the series follows.

 
HX-PA Series - Analog Position
Ratiometric output voltage from a precision potentiometer configured in a voltage divider circuit. Requires regulated input voltage up to 30 V maximum.


Drawing files, DXF Format:
 
HX-P420 Series - Analog Position
Loop powered 4 to 20 mA current transmitter with adjustable zero and span controls. Input voltage is 9V to 35V depending upon total loop impedance


Drawing files, DXF Format:
 
HX-EP Series - Digital Position
Digital, TTL level, two channel square wave output signal. 5 VDC input voltage. Optional configurations include 8 to 28 VDC, current sinking, push-pull & line driver capability


Drawing files, DXF Format:
 
HX-V Series - Velocity
Linear velocity transducer that incorporates a self-generating tachometer with voltage output that eliminates the need for any external power supply.


Drawing files, DXF Format:
 
HX-PB Series - Analog Position
Precision potentiometer in bridge circuit with integral zero and span controls which facilitate interfacing to a bridge amplifier. Requires regulated input voltage up to 30 V maximum.


Drawing files, DXF Format:
 
HX-P510 Series - Analog Position
P510 Provides a 0 to 10 VDC or 0 to 5 VDC voltage output and -10 VDC to +10 VDC or -5 VDC to +5 VDC voltage output. Includes adjustable zero and span controls. Requires input voltage of 4.9 to 30 VDC (unregulated acceptable).


Drawing files, DXF Format:
 
HX-VP Series - Velocity/Position
VP Series combines a self-generating tachometer and a percision potentiometer to give both velocity and analog position.

HX-VP Installation Guides:

Drawing files, DXF Format:
 

 

Home | Selection Guide | Products | Applications | How They Work | Trade Shows | Representatives | E-mail