The UniMeasure RTX series rotary position transducers with analog output are primarily for use in moderate duty applications in wet or dry environments. The chemical resistant thermoplastic case of the transducer provides NEMA 4 (IP-65) ingress protection for applications where exposure to washdown, rain, oil and other liquids may occur. The sealed case is achieved through the use of o-rings and a shaft seal. Electrical connection options include a body mounted sealed plastic connector with mating connector or a sealed bulkhead fitting and multi conductor electrical cable of user specified length. Alternatively, the mating connector may be ordered with electrical cable as a separate item. As an installation convenience, end mounted or radial mounted connection locations are offered. RTX models are available with analog voltage output from a voltage divider circuit or with 4 to 20 mA current output.

 
RTX-PA Series Rotary Position
RTX-P420 Series Rotary Position
Analog Voltage Output from a precision potentiometer.
4 to 20 mA Current output.


 
 
RTX-P510 Series Rotary Position
 
0 to 5 VDC, 0 to 10 VDC, -5 VDC to +5 VDC or -10 VDC to +10 VDC.
 

 
 
 
 

Home | Selection Guide | Products | Applications | How They Work | Trade Shows | Representatives | E-mail