Product

HX Series

HX Series

The UniMeasure HX Series consists of a family of environmentally sealed cable extension transducers for the measurement of linear position and/or linear velocity. The HX models are appropriate for hostile environments where exposure to rain, wash down, or submersion in various liquids are concerns. With standard features such as O-ring seals in all joints, wire rope dust, debris wipers, and rigid two-point mounting systems, our cable extension transducers are perfect for any linear position or linear velocity measurements performed in an adverse environment. Our cable extension transducers are available in two basic package configurations determined by the overall measurement range. Thirty ranges from 0-2 inches to 0-2,000 inches are offered. Electrical outputs include ratiometric voltage divider, bridge circuit, 4-20 mA, 0 to 5 or 0 to 10 VDC, ±10 VDC, and quadrature square wave digital. A brief description of each of the series follows.

HX-PA Series - Analog Position Ratiometric output voltage from a precision potentiometer configured in a voltage divider circuit. Requires regulated input voltage up to 30 V maximum.
HX-PB Series - Analog Position Precision potentiometer in bridge circuit with integral zero and span controls which facilitate interfacing to a bridge amplifier. Requires regulated input voltage up to 30 V maximum.
HX-P420 Series - Analog Position Loop powered 4 to 20 mA current transmitter with adjustable zero and span controls. Input voltage is 9V to 35V depending upon total loop impedance
HX-P510 Series - Analog Position P510 Provides a 0 to 10 VDC or 0 to 5 VDC voltage output and -10 VDC to +10 VDC or -5 VDC to +5 VDC voltage output. Includes adjustable zero and span controls. Requires input voltage of 4.9 to 30 VDC (unregulated acceptable).
HX-EP Series - Digital Position Digital, TTL level, two channel square wave output signal. 5 VDC input voltage. Optional configurations include 8 to 28 VDC, current sinking, push-pull & line driver capability