Product

JX-HM Series

The UniMeasure JX-HM series linear position measuring transducer is a relatively low cost device for use in moderate duty applications in hostile wet or dry environments. The chemical resistant thermoplastic case provides IP-67 (NEMA 6) ingress protection for applications where exposure to wash down, rain, oil and other liquids may occur. An integral dust wiper insures that the wire rope stays clear of debris as it is extracted and retracted. The sensing device is a non-contacting multi-turn absolute magnetic encoder which is not susceptible to wear in a vibrating or dithering environment. The unit is available with either a current output (4 to 20mA or 0 to 20mA) or a voltage output (0 to 5V, 0 to 10V, ±5V and ±10V). Removal of a sealed access hatch on the rear of the unit Reveals DIP switches that may be used for selecting the desired voltage or current outputs, and also push buttons that may be used for programming the zero and span settings. Zero and span may be set anywhere within the range of the transducer. The standard electrical connection includes a M12 sealed 4 position connector. For applications not requiring a connector, a bulkhead fitting with a length of multi-conductor electrical cable is available. One of four possible electrical connection locations on the transducer body may be specified when ordering. The wire rope exit direction may also be specified at time of order or may be user adjusted at time of installation.

UniMeasure JX Series transducers are low-cost linear displacement transducers for use in light to moderate duty applications in wet or dry environments. Our JX linear displacement transducers are plastic bodied and are ideal for high-volume OEM situations where cost is a major consideration and in applications where small size or low weight are of paramount importance. Models are available in 13 measurement ranges with the shortest range of 2″ (50 mm) and the longest range of 80″ (2000 mm). JX-EP is available in ranges from 10″ (250 mm) to 300″ (7.5 m).