Product

Standard Series

The Standard Series consists of a family of cable extension linear position and linear velocity transducers in a NEMA 1 (IP-40) housing. The linear transducer mechanism is housed inside of an aluminum cover and attached to an anodized aluminum baseplate with four mounting holes. The linear displacement measurement range determines which of three housing sizes is to be used. All of the possible UniMeasure analog and digital position outputs are offered in the Standard Series. The wire rope exit is perpendicular to the baseplate as shown in the photo but optional side and bottom wire rope exit locations are available. Our linear transducers also come with additional options including nylon jacketed wire ropes, dust wipers, terminal strips, non-standard potentiometers, and alternate connector locations.

V SERIES – VELOCITY
Linear velocity displacement transducer that incorporates a self-generating tachometer with voltage output that eliminates the need for any external power supply.

PA Series - Analog Position Ratiometric output voltage from a precision potentiometer configured in a voltage divider circuit. Requires regulated input voltage up to 30 V maximum.

PB Series - Analog Position Precision potentiometer in bridge circuit with integral zero and span controls which facilitate interfacing to a bridge amplifier. Requires regulated input voltage up to 30 V maximum.

P420 Series - Analog Position Loop powered 4 to 20 mA current transmitter with adjustable zero and span controls. Input voltage is 9V to 35V depending upon total loop impedance.

P510 Series - Analog Position P510 Provides a 0 to 10 VDC or 0 to 5 VDC voltage output and -10 VDC to +10 VDC or -5 VDC to +5 VDC voltage output. Includes adjustable zero and span controls. Requires input voltage of 4.9 to 30 VDC (unregulated acceptable).

EP Series - Digital Position Digital, TTL level, two channel square wave output signal. 5 VDC input voltage. Optional configurations include 8 to 28 VDC, current sinking, push-pull & line driver capability

VP Series - Velocity/Analog Position VP Series combines a self-generating tachometer and a precision potentiometer to give both velocity and analog position.

V Series - Velocity Linear velocity displacement transducer that incorporates a self-generating tachometer with voltage output that eliminates the need for any external power supply.